Marble Tile Manufacturer: Natural Stone Solutions For Projects
We supply marble tiles for floors and walls in villas, apartments and hotels, matched to your drawings, areas and interior style.
Why Choose Sibolla Building Marble Tiles
Sibolla Building supplies project-ready natural marble and marble-look porcelain for villas, apartments, hotels, and commercial spaces—combining luxury aesthetics with technical reliability.
Authentic stone selection: curated veining, coordinated palettes, and controlled slab sourcing.
Flexible formats & finishes: polished, honed, leathered; tiles, mosaics, large panels, and custom-cut trims.
Layout precision: book-match solutions, vein mapping, and strict batch/shade control.
Installer-focused support: white-setting guidance, optional pre-sealing, slip-rating data, and full technical documentation.
Surface Treatments of Sibolla Building Marble Tiles
Polished Marble Tiles
Mirror-like gloss that intensifies veining and reflects light for a premium, gallery-style finish. Best suited for walls, feature panels, and lobby areas. Not recommended for wet floors. Maintain with pH-neutral cleaners and avoid acidic products.
Honed Marble Tiles
Smooth, satin surface with low glare and a soft underfoot feel. Ideal for bathroom floors, living spaces, and commercial interiors where a refined, slip-conscious finish is required. Seal to enhance stain resistance; use white thinset for light marbles.
Brushed/Leathered Marble Tiles
Subtly textured surface that improves traction while softening visual wear. Suitable for entries, kitchens, and family bathrooms, delivering a warm matte appearance with enhanced practicality. Periodic sealing preserves depth and durability.
Tumbled/Sandblasted Marble Tiles
Weathered or micro-rough finish providing strong anti-slip performance and a natural, timeworn aesthetic. Recommended for steps, thresholds, patios, and covered outdoor areas in mild climates. Seal against moisture and salts; avoid freeze–thaw exposure and aggressive pool chemicals.
Sibolla Building Marble Tiles Solution FAQs
Q: Can subway tiles be used on floors or shower floors?
A: Most subway tiles are designed for walls. For floors, choose porcelain subway tiles that are floor-rated (PEI III/IV) with wet DCOF ≥0.42 or R10/R11. For shower floors, use mosaics or small formats to improve grip and drainage; avoid glossy finishes underfoot.
Q: How do I choose between Gloss, Matte, and Crackle finishes?
A: Gloss brightens spaces and wipes clean—great for backsplashes and shower walls. Matte/Satin gives a softer look and hides water spots—good for full-height walls. Crackle offers handcrafted character but must be sealed before/after grouting and periodically; keep it away from constant spray or submersion.
Q: Which sizes and patterns work best—3×6", 2×8", 4×12"? 50% or 33% offset?
A: All three sizes are classics. Use stacked (vertical or horizontal) for modern lines, or herringbone for a feature wall. For long rectangles, choose ≤33% offset to reduce lippage; set 2–3 mm grout joints for clean alignment.
Q: Are kitchen grease and shower water marks easy to clean? What grout do you recommend?
A: Yes—use pH-neutral cleaners (degreaser for kitchens) and a quick squeegee after showers. For stain resistance, specify epoxy or high-performance grout on backsplashes and wet areas. For glass tiles, use unsanded grout to avoid scratching; reseal stone/crackle surfaces as needed.
Q: Do you supply matching trims and what are the lead times/MOQs?
A: We provide bullnose, pencil, quarter round, chair rail, and inside/outside corners in coordinated colors. Samples ship in 48 hours; MOQs are flexible by series. Orders are packed by area with shade/batch control, and we support FOB/CIF/DDP with a 24-hour quote—send your drawings or BOQ.
Contact Us
We’ll get back to you within 24 hours. For urgent project inquiries, contact us directly at +86 13695169816. You can also upload your project drawing files
